The door of the light box is a good billboard with good advertising effect. How to fix the door head of the light box? Jinan light box company will introduce its fixing process to you:
1. First determine the installation position of the light box, and determine the installation method according to the actual situation and the type of light box.
2. Measurement size: according to the installation hole position on the back of the light box or the actual size on site, determine the fixing point of the light box installation.
3. Fixed light box:
A) the site wall is composed of aluminum-plastic plate, wood plate, iron plate, etc., which can be directly fixed with self tapping screws;
B) the site wall is of cement or brick structure, which can be drilled with impact drill first and fixed with expansion screw;
C) the site wall is composed of tile, marble, glass, etc. The glass drill can drill through the surface first, then drill the expansion screw hole, and then fix the light box or use the glue method.
D) the light box needs to be lifted or hung on site. After selecting the installation position, determine the installation point of the light box according to the actual size of the light box installation hole, and then install the lifting parts and grounding wires.
4. Wiring: the outgoing terminal of the power line of the normal light box is at the back. If the power supply is on the back of the light box, disconnect the power cord plug directly. If the power supply is outside the installation position of the light box, the outgoing line of the power supply of the light box can be connected to the edge of the light box, and then the three-phase plug can be inserted into the power socket.
5. Fix the light box: open the upper cover of the light box and install the fixing points (drill the power line at the bottom of the light box with an electric drill, reinstall the power line, and adjust it to the horizontal state with a level ruler);
6. Turn on the light and clean the surface of the light box.
Note: the ultrathin light box of light guide plate adopts electronic ballast, which is easy to generate induced current. Please connect the ground wire during installation to ensure safety.
Well, today's highlights will be introduced here. Do you have any questions about Jinan light box company? Welcome to our website: http://nyhczsg.com for online customer service!